Polish Remover
For efficient removal of polish at restoring of floors. Highly suitable for removal of tough polish coatings with many layers of polish and for removal of polyurethane polish.
Product properties
Dipex dissolves efficiently tough coatings with many layers of old polish and of polyurethane polish. Dipex is also efficient against greasy dirt. Efficiently dissolves protective paraffin coatings on new rubber floors. Dipex has a low pH value and does not cause discolouration. Suitable for use on linoleum floors without damaging the floor.
Dosing
• 0.5-1 litre per 9 litres of cold water.
• In especially difficult cases and for many layers: 1 litre per 4 litres of cold water.
• For removal of polyurethane polish: 1 litre per 2 litres of cold water.
Instructions for use
Apply the working solution over small areas to prevent drying and leave to act for 10-15 minutes. Scour thoroughly with a low-speed single disc machine and a coarse disc pad. Work with a scouring block in places inaccessible for the machine. Remove the dirty solution immediately with a wet vacuum cleaner! In difficult cases and for many layers of polish, it may be necessary to repeat the removal process several times until the floor is polish-free. Rinse the scoured areas immediately – two times with clean warm water. Remove the rinsing water as quickly as possible – use a wet vacuum cleaner. The floor shall have a neutral pH value, check using a pH stick. Leave the floor to dry well before performing the base, top and surface treatment.
Note
Avoid contact with painted surfaces.
Product information/Protection regulations
See the material safety data sheet.
Storage
Store in a cool place or at room temperature. The storage stability is at least 2 years in unopened packaging.
Transport packaging
3x5 litres in a cardboard box.
ADR
Not classified.
QR
QR1
06.01.2008